Description
MBD4x4 3-inch air suspension lift kit for Porsche Cayenne 955/957 vehicles equipped with factory air suspension.
This is the 3-inch kit with silver spacers shown in the product photograph. Contact TerraForge4x4 to confirm compatibility and delivery time before ordering.
Designed for air suspension
The pictured kit includes silver spacers, black brackets, adjustable links and mounting hardware. This listing is for the 3-inch air-suspension version, not the steel-spring lift kit.
Vehicle compatibility
- Porsche Cayenne 955 / 957
- Factory air suspension only
- Model year, engine, axle load and VIN verification required
Important: Volkswagen Touareg 7L and Audi Q7 4L applications will receive separate verified product listings. Shared platform engineering does not guarantee identical kit contents.
What’s included
- (4) Front strut brackets with hardware
- (6) Front upper shock mount spacers with hardware
- (4) Rear upper shock mount spacers with hardware
- (4) Level sensor links with hardware
- (2) Front level sensor mounts
- (1) 1.5-inch subframe drop kit with hardware
Before installation
- Resolve existing air-suspension faults.
- Inspect air struts, compressor, valve block and level sensors.
- Inspect control arms, ball joints, wheel bearings and CV boots.
- Record the original ride height at all four corners.
Important suspension notice
For both on-road and off-road use, we recommend keeping the vehicle in Auto / middle height for normal driving after the lift kit is installed. Sustained use of Offroad or High mode is not recommended, as the increased suspension and driveline angles can accelerate wear on CV joints and axle components.
At full droop, additional lift may also allow the air strut’s plastic bellows to contact the spindle. This can occur as a result of the suspension geometry at maximum extension and should be checked carefully during installation.
Professional installation is strongly recommended. All suspension clearances, air lines, brake hoses, wiring, driveline angles and alignment must be checked after fitting.
Installation requirements
Professional installation and four-wheel alignment are recommended. All factory height modes, brake hoses, air lines, wiring, tyre clearance and driveline angles must be checked after fitting. Follow the current MBD4x4 instructions and torque specifications supplied with the kit.
Price and availability
Price includes VAT. Contact TerraForge4x4 for current specification, availability and compatibility confirmation.
Read the 3-inch air suspension installation guide
MBD4x4 product and project material used with permission. Product specifications can change; the confirmed quotation and current manufacturer documentation take precedence.
Reviews
There are no reviews yet.